
Chair Leg Caps by Leg Shape
Chair leg caps slip over the bottom of each leg so a base pad, not bare wood or metal, touches your floor. Every cap in this collection has a pad underneath that slides on hardwood, laminate, vinyl and tile: felt on all but the wear resistant caps, which have a tan base pad. This collection covers round, square and angled legs, plus round and square metal tube legs.
For round wooden legs, start with our round felt chair leg caps, in four sizes from 10 to 30 mm, or our Chair Shoes, felt chair leg protectors for round legs from 16 to 40 mm. For stools and chairs whose legs lean outward, the angled chair leg floor protectors have a sole set at 15 degrees so the felt sits flat.
Measure before you pick a size. Our guide on how to measure chair legs for protectors shows where to hold the ruler. For pads, glides and covers as well as caps, see all chair leg floor protectors.
How to choose chair leg caps
Start with the shape of the leg where it meets the floor, then its size. Round wooden legs have the widest choice. Square legs, splayed legs and metal tube legs each need a cap made for them, because a cap of the wrong shape leaves gaps and works loose.
| Product | Fits | Pack | Attaches by |
|---|---|---|---|
| Felt-Base Leg Caps | Round legs 10 to 30 mm, in 4 sizes | 16 | Slips on and grips by stretch |
| Chair Shoes | Round legs 16 to 40 mm, in 3 sizes | 16, 32 or 48 | Slips over the leg |
| Clear Chair Leg Caps | Round legs; top opening 15, 22 or 28 mm, in 3 sizes | 16 | Pushes on over the leg end |
| Wear Resistant Chair Leg Caps | Round 19 to 25 or 30 to 40 mm; square 19 to 25 or 35 to 45 mm | 16 | Pushes on by hand |
| Angled Chair Leg Floor Protectors | Round or square legs 20 to 35 mm that splay about 15 degrees | 8 | Slips on and grips by stretch |
| Felt Lined Metal Chair Leg Caps | Metal tube: round 16, 19, 22 or 25 mm; square 20 mm | 4 | Snug slip-on fit, sized to the tube |
Square legs: the Wear Resistant caps come in square 19 to 25 mm (brown only) and 35 to 45 mm (clear or brown), the Felt Lined Metal caps in square 20 mm tube, and the angled caps in square 1 in and 1.25 in. See all square chair leg caps for the full square range.
Color: clear caps let the leg show through, brown suits walnut, cherry and other mid-brown woods, and the Felt-Base Leg Caps come in black. For a round wooden leg whose finish you want to keep on show, our clear chair leg caps are see-through cups with a felt base pad, in three sizes. The angled caps are brown only, and the Felt Lined Metal caps are clear with black felt.
Measuring tips
- Measure across the bottom of the leg, where it touches the floor, in mm. Tapered legs are narrower there than higher up.
- Round legs: measure straight across the middle. Square legs: measure side to side, not corner to corner.
- Metal tube legs: measure the outside of the tube. The Felt Lined Metal caps are made for one exact tube size each, so a 22 mm tube needs the 22 mm cap.
- Stretch caps are sold by a range. Pick the range your leg falls inside. If it sits on the line between two ranges, the smaller size grips tighter.
- The clear chair leg caps list a top opening, not a leg range: 15, 22 or 28 mm. Pick the opening closest to the end of the leg. If the leg sits between two openings, a cap sold by a leg range fits more surely.
- The Wear Resistant caps skip a size band: they do not fit round legs of 26 to 29 mm or square legs of 26 to 34 mm. For a round leg of 26 to 29 mm, the Felt-Base Leg Caps size L (25 to 30 mm) or Chair Shoes Medium (22 to 32 mm) fit.
- Splayed legs: if the leg leans out, a flat cap will not sit flat. Use the angled caps.
Honest limits
- Felt slides. It does not grip, so it will not stop a chair from moving on a smooth floor, and on carpet it does little.
- Felt picks up grit over time. Brush it clean now and then, and replace the caps once the felt is worn through.
- A cap that is too big slips off, and one that is too small will not go on. Measure first.
- The angled caps suit legs splayed by about 15 degrees. The further a leg is from that angle, the more the felt rides on one edge.
- Caps do not fit sled bases or runners, where the tube lies along the floor, or legs that already have glides fixed in the end.
Related guides: best chair leg floor protectors compares caps, pads and glides, and felt vs rubber chair leg caps explains when a chair should slide and when it should grip.
Chair Leg Caps by Leg Shape: questions and answers
How do I measure for chair leg caps?
Measure across the bottom of the leg where it touches the floor, in mm. On square legs, measure side to side, not corner to corner. Our <a href="/pages/size-guide">size guide</a> shows each step.
Will chair leg caps fall off?
A cap that matches the leg size stays on when the chair is dragged. A cap that is too big slips, so measure the leg before you choose a size, and for the clear caps compare the leg end with the listed top opening.
Do caps fit angled or splayed legs?
A flat cap lifts at one edge on a splayed leg. Our <a href="/products/angled-chair-leg-floor-protectors">angled caps</a> have a 15 degree sole that sits flat on legs splayed by about that much, in round or square, 1 in or 1.25 in.
Which caps fit metal hairpin legs?
Hairpin legs are thin steel rods, usually 3/8 in or 1/2 in across, and most chair caps start too large for them. A 1/2 in rod (about 13 mm) fits the XS size of the <a href="/products/felt-base-leg-caps">Felt-Base Leg Caps</a>, made for 10 to 15 mm. A 3/8 in rod (about 9.5 mm) is below the smallest size in this collection, so none of these caps will grip it.
How many caps do I need?
One per leg, so four for most chairs. The Felt-Base Leg Caps, clear caps and Wear Resistant caps come 16 to a pack, enough for four chairs. Chair Shoes come in packs of 16, 32 or 48, depending on size. The angled caps come 8 to a pack, enough for two chairs, and the Felt Lined Metal caps come 4 to a pack, enough for one.
Do you have chair leg caps for square legs?
Yes. The Wear Resistant caps come in square 19 to 25 mm and 35 to 45 mm, the Felt Lined Metal caps in square 20 mm tube, and the angled caps in square 1 in and 1.25 in. See all <a href="/collections/square-chair-leg-caps">square chair leg caps</a>.







