No scrape. No scuff. No noise.Free US shipping until Dec 31
Office chair wheel stoppers, close-up of one black boot with its slanted opening and dark brown felt base
All 5 black wheel stopper boots in the pack, three upright and two showing the felt base
Five black wheel stopper boots on the casters of an office chair on a hardwood floor
Hands stretching a wheel stopper boot up over an office chair caster
Dark brown felt base of a wheel stopper boot beside an upright boot with its slanted opening

Office Chair Wheel Stoppers

5 stretch-on boots with a felt base, one pack for a five-wheel chair

$17.99 · Free US shipping until Dec 31

Black boots that stretch over each caster of a five-wheel office chair and wrap the wheel, so the wheels cannot roll and a dark brown felt base touches the floor instead. The supplier lists an applicable range of 4.5 to 5.5 cm (1.8 to 2.2 in).

  • 5 boots per pack, one for each wheel of a five-wheel chair
  • Stretch the opening over the caster: no glue, no tools
  • Felt base: the felt, not the wheel, touches the floor
  • Supplier's range 4.5 to 5.5 cm (1.8 to 2.2 in): measure one wheel first
Pack

Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.

  • Secure checkout: pay with PayPal, Shop Pay or card
  • Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
  • 30-day refund policy · Size guide
American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay Visa

Office chair wheel stoppers keep a desk chair from rolling away every time you sit down or stand up. Each black boot stretches over one caster and wraps the wheel, so the chair rests on five felt bases instead of five rolling wheels.

One pack holds 5 boots, enough for one office chair with five wheels. Unlike flat caster cups, which sit on the floor under a wheel, each boot stretches around the caster itself.

Comparing options? Browse all chair stoppers, use non slip furniture grippers for furniture with legs, see all floor protectors by type, or read our guide to the best chair mat for hardwood floor.

Sizes and what is in the pack

These are the supplier's figures, taken from its product photos.

Item Size
Boots per pack 5
Shell height 57 mm (2.24 in)
Base band, felt and black rim 10 mm (0.39 in)
Total height about 67 mm (2.64 in)
Inside width 45 mm (1.77 in)
Inside floor 34 mm (1.34 in)
Supplier's applicable range 4.5 to 5.5 cm (1.8 to 2.2 in)
Shipping weight, 5-boot pack 185 g (6.5 oz)

How to measure your casters

Tip the chair over and measure one wheel straight across, from edge to edge. Office chair casters are usually sold by this wheel size. The supplier lists an applicable range of 4.5 to 5.5 cm (1.8 to 2.2 in) but does not say which measurement it refers to, so the wheel size is the closest number to compare it with.

Then measure across the whole caster, both wheels and the housing, and compare it with the 45 mm (1.77 in) inside width. Large 65 mm (2.56 in) or 75 mm (2.95 in) wheels are outside the range the supplier lists.

How to fit them

  1. Tip the chair back or lay it on its side so the wheels are off the floor.
  2. Hold a boot with the felt facing away from the chair, stretch the slanted opening with your fingers and push it over the caster until the wheel sits on the ribbed inside floor.
  3. Check that the rim closes around the caster housing on every side.
  4. Fit the other four boots, then stand the chair up.

To take a boot off, stretch the opening again and lift the caster out. No glue or tools are involved.

Where they work and their limits

The boots suit office and desk chairs on hardwood, laminate, vinyl and tile, where a chair rolls away easily. The felt base, not the wheel, is what touches the floor.

  • The chair does not lock in place. Push it and it slides on the felt instead of rolling. For chairs and tables with legs that must stay put, non slip furniture grippers hold better.
  • Felt collects grit. Wipe the bases now and then, because trapped grit can scratch a wood floor.
  • If you want the wheels to keep rolling and only need to protect the floor, a chair mat is the usual answer; our guide on how to protect hardwood floors from office chairs compares mats with soft casters.
  • For chairs with legs instead of wheels, see chair leg floor protectors.

Questions

What do office chair wheel stoppers do?

Each boot wraps one caster wheel, so the wheel cannot roll on the floor. The chair rests on five felt bases instead of five wheels and stops rolling away when you sit down or stand up.

Why 5 per pack?

Most office chairs have five arms on the base with a wheel under each arm, so one pack covers one chair.

Will my wheels fit?

The supplier lists an applicable range of 4.5 to 5.5 cm (1.8 to 2.2 in), an inside width of 45 mm and an inside floor of 34 mm. Measure one wheel across and compare it with the size table on this page before you order.

Can I still move the chair?

Yes. Push it and it slides on the felt bases instead of rolling. To get rolling wheels back, stretch the boots off.

Do they mark floors?

The felt base touches the floor, not the shell or the wheel. Wipe grit off the felt now and then, because trapped grit can scratch wood.

More in Chair Stoppers

See all Chair Stoppers

Cart • 0 items

Loading your bag…