Square Silicone Chair Leg Caps, White or Brown
16 caps of one size and color, for 4 chairs with square legs
$19.99 · Free US shipping until Dec 31
Stretchy silicone caps that slip over the bottom of square chair and table legs, so the bare wood edge does not scrape the floor. Pick the size range your leg falls in, then frosted white or brown.
- 16 caps per pack, one size and color: enough for 4 chairs
- Square legs 19-25, 22-28 or 35-40 mm wide
- Frosted white or solid light brown silicone
- Push on by hand, no glue; rinse clean under a tap
Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.
- Secure checkout: pay with PayPal, Shop Pay or card
- Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
- 30-day refund policy · Size guide
Square silicone chair leg caps slip over the bottom of a square chair or table leg, so the soft cap, not the hard wood edge, meets your floor. Each pack holds 16 caps of one size and color, enough for four chairs. There are three sizes, for square legs 19 to 28 mm or 35 to 40 mm wide, in frosted white or a solid light brown.
Comparing options? See all square chair leg caps, the wider range of silicone chair leg protectors, or chair leg caps for every leg shape. Not sure of your size? Read how to measure chair legs for protectors.
Sizes and what is in the pack
The supplier lists each size by the width of the square leg it is made for. Every pack has 16 caps.
| Size | Square legs | Colors |
|---|---|---|
| Small | 19-25 mm (0.75-0.98 in) | White, Brown |
| Medium | 22-28 mm (0.87-1.10 in) | White, Brown |
| Large | 35-40 mm (1.38-1.57 in) | White, Brown |
How to choose the right size
Turn the chair over and measure one side of the leg at the very end, where it touches the floor. Many legs taper, so the end can be narrower than the middle.
Pick the range your number falls in. A leg of 22 to 25 mm sits in both small and medium: the small cap stretches more and holds tighter, while the medium goes on more easily. Square legs of 29 to 34 mm, or wider than 40 mm, are outside all three sizes.
The supplier gives no inside measurements or cap height, so we only list the leg widths above. If your leg is clearly rectangular rather than square, these caps are the wrong shape.
How to fit them
- Wipe the leg end clean and dry.
- Turn the chair upside down or on its side.
- Stretch the collar over the leg end and push the cap straight on until the leg reaches the bottom of the cup.
- Stand the chair up and check that all four caps sit flat on the floor.
There is no glue, nail or screw. To take a cap off, peel the collar back and pull it off the leg.
Where they work, and where they do not
The cap wraps the end and the bottom edges of the leg, so a square corner can no longer dig into the floor when the chair is pulled out. They suit dining chairs, kitchen chairs and small tables with straight square legs on hardwood, laminate, vinyl and tile. The caps rinse clean under a tap.
The supplier lists this range as its "with felt" version. Its photos show a beige felt disc under the round caps in the same listing; none shows the underside of these square caps, so we do not promise felt on them or say how they slide.
- Round legs: these are square cups. For round legs, see our silicone chair leg covers.
- Angled legs: the caps are straight cups, so on legs that splay out they rest on one edge. Our angled chair leg floor protectors have a sole set at 15 degrees.
- Rectangular legs: for flat, rectangular patio legs, see patio chair leg caps in rectangular sizes.
- Metal tube legs: the supplier shows these caps only on wooden legs. For metal tube legs, see our tube leg caps, sized by tube width.
- Grit: sand and crumbs stuck to the base can scratch a floor. Wipe the bases now and then.
White or brown?
White caps are frosted, so the leg shows faintly through them; they suit white, gray and light wood legs. Brown caps are a solid warm light brown that suits mid-tone wood. Both colors come in all three sizes.
Questions
Which size do I need?
Measure one side of the leg at the very bottom, where it meets the floor. The supplier sizes the caps for square legs 19 to 25 mm (0.75 to 0.98 in), 22 to 28 mm (0.87 to 1.10 in) or 35 to 40 mm (1.38 to 1.57 in) wide. Our size guide shows how to measure.
Do they have felt?
The supplier lists this range as its "with felt" version. Its photos show a beige felt disc under the round caps in the same listing, but none shows the underside of these square caps, so we do not promise felt on them.
White or brown?
White is frosted, so the leg shows faintly through it; it suits white, gray and light wood legs. Brown is a solid warm light brown that suits mid-tone wood.
How many come in a pack?
16 caps of one size and color, enough for four chairs with four legs each. For two sizes or two colors, order two packs.
My leg is 22 to 25 mm. Small or medium?
Both ranges cover it. A silicone cap holds by stretching, so the small size grips the leg tighter and the medium size is easier to push on.
My leg is 29 to 34 mm, or wider than 40 mm. What now?
None of these three sizes is made for it. See all square chair leg caps for other square sizes, or our large furniture leg caps, which come in square sizes up to 60 x 60 mm.












