No scrape. No scuff. No noise.Free US shipping until Dec 31
Felt chair booties in gray, two on wooden chair legs and one on its side showing the felt sole
One pack of 4 gray chair booties laid out in a 2 by 2 grid, felt soles toward the camera
Wooden chair wearing gray knit chair booties on a hardwood floor
Hand pulling a brown chair bootie up over the bottom of a wooden chair leg
One pack of 4 brown chair booties, one on its side showing the dark brown felt sole
One pack of 4 black chair booties, one on its side showing the black felt sole

Felt Chair Booties, 4 Pack

4 knit booties with felt soles, one chair, one color

$12.99 · Free US shipping until Dec 31

Knit chair booties with a round felt sole that pull over the bottom of each leg. One pack of 4 covers one chair, with no glue or tools.

  • 4 booties per pack, one chair, 7 cm (2.76 in) tall
  • Fit legs 6 to 17 cm (2.36 to 6.69 in) around
  • Ribbed polyester and elastic knit, felt sole sewn on
  • Brown, black or gray
Color

Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.

  • Secure checkout: pay with PayPal, Shop Pay or card
  • Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
  • 30-day refund policy · Size guide
American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay Visa

Felt chair booties pull over the bottom of a chair leg so a felt sole, not bare wood or metal, touches the floor. Each bootie is a ribbed knit sleeve of polyester yarn with elastic, about 7 cm tall, with a round felt disc sewn to the base. A pack holds 4 booties in one color, enough for one four-legged chair. They are also sold as chair leg booties or chair leg boots.

Comparing styles? See all chair leg socks and chair leg covers, or read how to measure chair legs for protectors before you order.

Size and what is in the pack

Item Size
Height 7 cm (2.76 in)
Top opening 3 cm across (1.18 in), stretches
Felt sole 4 cm across (1.57 in)
Fits legs 6 to 17 cm around (2.36 to 6.69 in)
Round legs, full fit 1.9 to 4 cm across (0.75 to 1.57 in), felt covers the whole foot
Stretches to 5.4 cm across (2.1 in), felt covers the center only
Pieces 4 booties, one color (one chair)

Colors: brown, black or gray. In brown and gray the felt sole is a darker shade than the knit; in black both are black.

How to measure and choose

Wrap a soft tape measure around the leg about 2 cm above the floor. If it reads between 6 and 17 cm (2.36 and 6.69 in), these booties will go on. No tape? Wrap a strip of paper around the leg, mark where it overlaps and measure the strip with a ruler.

Check the leg width too. The felt sole is 4 cm (1.57 in) across, so on a leg wider than that the knit stretches over the edge and the felt no longer covers the whole foot.

For color, match the leg or the floor. Gray suits light wood and white or metal frames, brown suits mid and dark wood, and black suits black metal and dark floors.

Fitting a whole dining set? Order one pack per chair. For a bigger set in one box, our knitted chair socks are the same ribbed knit with a felt pad, 24 to a pack in gray or brown. These booties come 4 to a pack and also in black.

How to fit them

  1. Tip the chair back or lay it on its side on a rug.
  2. Stretch the top opening with your fingers and pull the bootie up over the end of the leg.
  3. Check that the felt sole sits flat and centered under the leg, then smooth the knit up the leg.
  4. Stand the chair up and repeat on the other legs.

No glue, nails or tools are needed, and they pull off the same way.

Where they work and their limits

Felt chair booties suit wood, metal and painted chair legs on hardwood, laminate, vinyl and tile. The felt slides on a hard floor, so chairs move with less scraping, and the knit also covers the lower leg against knocks from vacuum cleaners and feet.

Knit is softer than a molded cap. On chairs pulled in and out many times a day the booties can slide down the leg, and the knit picks up dust and hair over time. For a firmer grip on round legs, look at chair leg caps or our felt bottom chair leg covers. For square legs, see square chair leg caps.

The supplier gives no washing instructions, so if they get dirty, hand wash them in cool water and let them air dry.

Questions

What leg sizes do they fit?

Legs 6 to 17 cm (2.36 to 6.69 in) around, measured with a tape about 2 cm above the floor. On legs wider than about 4 cm (1.57 in) across, the felt sole will not cover the whole foot. See how to measure chair legs.

Are chair booties the same as chair socks?

Very close. The body is a ribbed knit sock; the difference is the round felt sole sewn to the bottom, which is what touches the floor.

Do they slide?

Yes. The felt sole slides on hardwood, laminate, vinyl and tile, so the chair moves on felt instead of bare wood or metal.

How many come in a pack?

4 booties in one color, enough for one chair with four legs. For more chairs, order one pack per chair.

Will they stay on?

The elastic knit grips the leg, but knit can work down on chairs that are dragged often. For a firmer hold, see chair leg caps.

Do they work on square legs?

The size is given as a circumference, so a small square leg within 6 to 17 cm around will take one, but the sole is round. For square legs, square chair leg caps fit better.

More in Chair Leg Socks

See all Chair Leg Socks

Cart • 0 items

Loading your bag…