
Silicone Chair Leg Protectors
Silicone chair leg protectors cover the end of a chair, stool or table leg with a soft silicone cup, so bare wood or metal no longer touches the floor. Plain silicone grips the floor, so the chair stays where you put it. Each pack holds one size, so measure a leg before you order.
Round legs take one of two stretch covers: silicone chair leg covers in frosted clear, pink, pale blue or brown, or cat paw chair leg covers for round legs of 25 to 35 mm. Square wooden legs take square silicone chair leg caps, which stretch over legs 19 to 28 mm or 35 to 40 mm wide.
Metal tube legs take tube leg caps in round 16 or 30 mm and square 20, 25 or 30 mm. Rectangular tube on patio chairs takes the rectangular patio caps in the grid below, in 15 x 30, 20 x 30 or 25 x 38 mm.
Want a cap with a felt base that slides instead? Browse all chair leg caps by leg shape.
How to choose silicone chair leg protectors
Start with the shape of the leg end (round, square or rectangular), then look at how the protector goes on. Stretch covers and the square caps pull over the leg and hold by tension, so they allow a small range. Tube and patio caps are firmer cups made for one tube size, so the size has to match closely.
| Type | Fits | Floor | Attaches by |
|---|---|---|---|
| Silicone chair leg covers, 16 pack | Slim round legs; one size, 4 x 3.2 cm as the supplier lists it | Hard floors; grips | Stretches over the leg end |
| Cat paw chair leg covers, 4 pack | Round legs: S 25 to 30 mm, M 30 to 35 mm | Hard floors; grips | Stretches over the leg end |
| Square silicone chair leg caps, 16 pack | Square legs: S 19 to 25 mm, M 22 to 28 mm, L 35 to 40 mm | Hard floors | Stretches over the leg end |
| Tube leg caps, 4 pack | Round 16 or 30 mm; square 20, 25 or 30 mm | Hard floors; grips | Firm cup, slips over the leg end |
| Patio chair leg caps rectangular, 4 pack | Rectangle 15 x 30, 20 x 30 or 25 x 38 mm | Deck, patio stone, hard floors; grips | Firm cup, slips over the leg end |
The silicone chair leg covers and square caps come 16 to a pack, enough for four chairs with four legs each. The cat paw covers, tube caps and patio caps come 4 to a pack, enough for one chair, stool or small table. Every pack holds one size and one color, so order one pack for each leg size you have.
How to measure a chair leg
- Tip the chair onto a towel so the leg ends face you.
- Measure across the bottom of the leg, where the protector will sit, in mm. Many legs taper, so the foot is often thinner than the top.
- Round leg: measure the full width through the center. Square leg: measure one flat side, not corner to corner. Rectangular leg: measure the short side and the long side.
- Pick the size that matches. For reference, 16 mm is about 5/8 in, 25 mm is about 1 in, 30 mm is about 1 3/16 in and 38 mm is about 1 1/2 in.
The firm tube and patio caps do not stretch. A leg that is too big will not go in, and a leg that is too small sits loose and can slip off. Our guide on how to measure chair legs for protectors walks through each step.
Honest limits
- Plain silicone grips, so the covers, tube caps and patio caps do not glide. Dragging a chair takes more effort than on felt. For a chair that should slide, choose round felt chair leg caps.
- The supplier lists the square caps as its "with felt" version, but no photo shows the underside of the square caps. We do not promise felt on them or say how they slide.
- The silicone chair leg covers come in one size. The supplier gives the cup size, 4 x 3.2 cm, but no leg range, so they suit slim round legs, not thick ones.
- The silicone chair leg covers and cat paw covers are round and do not fit square legs. Square legs under 19 mm, 29 to 34 mm or over 40 mm wide fall outside the square cap sizes; see square chair leg caps for more.
- The caps fit straight leg ends only. Flattened, scrolled or sled feet need a different fitting.
- Grit trapped under any protector can still scratch a floor. Wipe the bases now and then.
- The patio caps have closed bottoms, so rain can sit inside, and the supplier gives no sun or frost rating. Check them each season.
Related guide: felt vs rubber chair leg caps, for when a chair should grip and when it should slide.
Silicone Chair Leg Protectors: questions and answers
Will silicone chair leg protectors mark my floor?
Silicone is soft and keeps bare wood or metal off the floor, so the leg end cannot scratch it. Grit trapped under a cap still can, so wipe the bases now and then. The supplier gives no stain test, so on vinyl and LVP, test one leg in a hidden spot first.
Does silicone grip or slide?
Plain silicone grips the floor, so the chair stays put; the covers, tube caps and patio caps here have no felt base. The supplier calls the square caps a "with felt" version, but no photo shows felt under the square caps, so we do not promise they slide. For a chair that should slide, choose <a href="/products/felt-base-leg-caps">round felt chair leg caps</a>.
Do silicone chair leg caps fit metal legs?
Yes, if the size matches. <a href="/products/tube-leg-caps-round-square">Tube leg caps</a> fit round and square metal tube, and the <a href="/products/patio-chair-leg-caps-rectangular">patio chair leg caps rectangular</a> fit rectangular tube. Sharp tube edges can wear through any soft cap over time.
Do silicone chair leg protectors stay on when the chair is dragged?
Yes, when the size matches. The cat paw covers and square caps stretch, so pick the size whose range includes your leg; the silicone chair leg covers come in one size for slim round legs. The tube and patio caps are firm cups made for one leg size, so a cap that is too big sits loose and can slip off.
Do they fit square legs?
Yes. <a href="/products/square-silicone-chair-leg-caps">Square silicone chair leg caps</a> stretch over square legs 19 to 25, 22 to 28 or 35 to 40 mm wide, and the tube leg caps fit square metal tube of 20, 25 or 30 mm. The silicone covers and cat paw covers are round; for more square sizes, see <a href="/collections/square-chair-leg-caps">square chair leg caps</a>.






