No scrape. No scuff. No noise.Free US shipping until Dec 31

Furniture Pads for Hardwood Floors

Furniture pads for hardwood floors put a layer of felt between each leg and the wood, so chairs, tables and sofas slide instead of scratching. Everything in this collection has a pad where it meets the floor: stick-on felt pads, a felt roll you cut to shape, nail-on felt glides, slip-on caps with a felt base, and wear resistant caps with a tan base pad.

These are the hardwood floor protectors we stock: furniture pads for wood floors, solid or engineered. They are wood floor protectors for furniture of every kind, from dining chairs to sofas.

Pick by how often the piece moves. Sofas, beds and cabinets that rarely move do well with stick-on pads; for more pads of one size, round and square felt pads come one size per pack, from 27 mm rounds to 85 mm squares. Dining and kitchen chairs are dragged every day, so a cap that grips the leg or a glide nailed into it stays on longer.

Shopping for chairs only? See chair leg floor protectors or felt chair pads. For every floor type, browse all furniture pads.

Measure the bottom of one leg before you order. Our size guide shows how to measure chair legs for protectors.

How to choose furniture pads for hardwood floors

Everything here slides on a pad, felt on all but the wear resistant caps, and every product also works on laminate, vinyl and tile. What decides the pick is the leg: its shape, its size and what it is made of.

Type Fits Attaches by
Self adhesive furniture pads, 101 pieces Flat leg ends: round 22, 28 or 45 mm, square 22 or 45 mm, two rectangles, one sheet to cut Adhesive back
Felt for bottom of furniture, 1 roll Sofa plinths, cabinet runners, bed rails and odd shapes; 4 to 10 cm (1.6 to 3.9 in) wide, 100 cm (39.4 in) long Adhesive back, cut with scissors
Nail-on felt chair glides, 100 pieces Wooden legs with a flat end 20 mm (3/4 in) across or a little wider A center nail tapped into the wood
Slip-on caps: round felt chair leg caps (felt base) and wear resistant chair leg caps (tan base pad), 16 pieces Chair legs: round 10 to 40 mm, square 19 to 25 or 35 to 45 mm Slips over the leg end
Large furniture leg caps, 8 pieces Table and sofa legs: round 38, 50 or 60 mm, square 38, 40, 50 or 60 mm Slips over the leg end

On an inch tape: 19 mm is 3/4 in, 25 mm is about 1 in, 38 mm is 1 1/2 in, 50 mm is just under 2 in and 60 mm is about 2 3/8 in.

A pack of 16 caps covers 4 four-legged chairs, 100 nail-on glides cover 25 chairs, and 8 large caps cover two four-legged tables or sofas with the same leg size.

How to measure the leg

  • Turn the piece over and measure across the bottom of the leg, where it touches the floor, in millimeters if you can (25 mm is about 1 inch). Many legs taper, so the top of the leg is no guide.
  • Round leg: measure straight across the end. Square leg: measure one side.
  • Pads: choose one the same size as the leg end or slightly smaller, so no felt overhangs and catches.
  • Caps: each size is the leg size it fits. The chair caps cover a range, so pick the range your leg falls in.
  • Large furniture leg caps come in exact sizes only (round 38, 50 or 60 mm, square 38, 40, 50 or 60 mm), so a 45 mm leg fits none of them. Use the 45 mm round or square felt pad from the pad pack instead.
  • Check every leg. Front and back legs on one chair are often different sizes.

Full steps are in our guide on how to measure chair legs for protectors. It works for table and sofa legs too.

What felt will not do

  • Felt picks up grit, and dirty felt can scratch. Sweep under furniture and replace pads that are worn flat or dirty.
  • Stick-on pads and the felt roll can peel off chairs that are dragged every day. Use caps or nail-on glides on those.
  • Nail-on glides need a solid wooden leg. They do not go on metal or plastic legs.
  • No cap here fits square legs of 26 to 34 mm. On a wooden chair leg, use nail-on felt chair glides instead. On furniture that rarely moves, use a 22 mm square felt pad, or cut a square from the sheet in the pad pack.
  • Felt is made to slide. To keep a sofa or bed from moving, use non slip furniture grippers instead.
  • Office chairs on casters roll rather than slide, so leg pads do not fit them. Put a clear PVC chair mat for hardwood floors under the chair instead.
  • Legs that meet the floor at an angle need angled chair leg floor protectors, not flat pads.

Related guides: how to protect hardwood floors from furniture, and what to look for in the best furniture pads for hardwood floors.

Furniture Pads for Hardwood Floors: questions and answers

What material is best under furniture on hardwood?

Felt, for anything you move: it slides without scratching. Avoid bare metal feet and hard plastic, and keep the felt free of grit. For a sofa or bed that should stay put, use <a href="/products/non-slip-furniture-grippers">non slip furniture grippers</a> instead.

Can felt pads damage hardwood floors?

Clean felt does not. Dirty felt can, because grit caught in it acts like sandpaper. Replace pads when they are worn flat or dirty.

Pads or caps for chairs on hardwood?

Stick-on pads suit furniture that rarely moves. Chairs are dragged daily, so felt-base caps that slip over the leg, or nail-on glides on wooden legs, stay on longer.

What size pad or cap do I need?

Measure across the bottom of the leg. Choose a pad the same size or slightly smaller, and a cap whose size range includes your leg. Our guide on <a href="/pages/size-guide">how to measure chair legs for protectors</a> shows where to put the ruler.

What goes under a sofa or cabinet with a long flat base?

A roll of <a href="/products/felt-for-bottom-of-furniture-self-adhesive-roll">felt for bottom of furniture</a>. Cut it with scissors to the shape of the base. Each roll is 100 cm (39.4 in) long and 4 to 10 cm (1.6 to 3.9 in) wide.

Do these wood floor protectors for furniture suit engineered wood and laminate?

Yes. The same felt products suit engineered wood, laminate and vinyl plank. For vinyl, see <a href="/collections/furniture-pads-for-lvp-flooring">furniture pads for LVP flooring</a>.

Cart • 0 items

Loading your bag…