Clear PVC Chair Mat for Hardwood Floors
One frosted mat, 90 x 120 cm (35.4 x 47.2 in), 2 mm thick
$47.99 · Free US shipping until Dec 31
A see-through PVC sheet, 90 x 120 cm (35.4 x 47.2 in), that goes under a desk chair so the casters roll on the mat instead of the hardwood. Frosted (matte) PVC with rounded corners and no studs underneath, made for hard floors, not pile carpet.
- 90 x 120 cm (35.4 x 47.2 in), 2 mm (0.08 in) thick
- Clear frosted PVC: the floor shows through
- Flat underside with no studs, made for hard floors
- One mat, 2.7 kg (5.95 lb), ships from a US warehouse
Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.
- Secure checkout: pay with PayPal, Shop Pay or card
- Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
- 30-day refund policy · Size guide
Clear PVC chair mat for hardwood floors: one see-through sheet, 90 x 120 cm (35.4 x 47.2 in), that goes under a desk chair so the casters roll on the mat instead of the floor finish. It is 2 mm thick frosted (matte) PVC with rounded corners and a flat underside with no studs. Because it is clear, the wood grain still shows through.
Comparing options? Read our guide to the best chair mat for hardwood floor, see all floor protectors and furniture pads for hardwood floors, or learn how to protect hardwood floors from every piece of furniture.
Size and what is in the box
| Measure | Metric | US |
|---|---|---|
| Length | 120 cm | 47.2 in |
| Width | 90 cm | 35.4 in |
| Thickness | 2 mm | 0.08 in |
| Weight | 2.7 kg | 5.95 lb |
| In the box | 1 mat | |
The supplier sizes the mat in centimeters, so it is a little smaller than a 36 x 48 in mat. It is a plain rectangle with rounded corners: no lip and no cut-out. The material is PVC with a frosted (matte) finish, and it ships from a US warehouse.
How to choose and measure
Measure the area your chair covers while you work: from the desk edge back to where the chair stops when you stand up, and side to side across your reach. Every caster needs to stay on the mat, so the whole area the chair base covers as you roll, not only the distance you move, must fit inside 90 x 120 cm (35.4 x 47.2 in).
Lay the long side going away from the desk if you roll back a lot, or along the desk if you slide from side to side. If the casters keep rolling off the edge, your work area is larger than the mat.
How to lay it down
- Sweep or vacuum the floor first. Grit trapped under the mat can mark the floor.
- Pick the side. The mat is smooth on one side and textured on the other. The supplier says to put the textured side down on a smooth floor and the smooth side down on a textured floor.
- Let it flatten. It ships rolled, so it may curl when unpacked. The supplier advises warming it and pressing it flat under heavy objects, such as books, for 3 to 5 days.
- Roll the chair on once the mat lies flat.
Where it works and its limits
The mat is made for hard floors: hardwood, laminate, vinyl and tile. The supplier also lists carpet tiles. It has no studs on the underside, so it is not made for pile carpet, where a flat mat can creep.
On laminate, the mat goes under the desk chair the same way; our guide to protecting laminate floors from furniture covers the chairs and heavy pieces around it.
The supplier notes that the frosted (matte) finish makes scuffs less visible. Casters still wear any plastic over time, and grit can work its way underneath, so lift the mat now and then and wipe the floor and the underside. If you would rather skip the mat, our guide on how to protect hardwood floors from office chairs compares it with soft casters and wheel stoppers.
A mat protects one spot. For dining chairs and other four-legged chairs that are dragged around a room, protect each leg instead with dining chair leg protectors or chair leg floor protectors. To keep a desk chair from rolling at all, see our office chair wheel stoppers.
Questions
What size is it?
90 x 120 cm (35.4 x 47.2 in), 2 mm (0.08 in) thick. The supplier sizes it in centimeters, so it is a little under 36 x 48 in.
Is it for carpet?
Not for pile carpet. The supplier lists it for hard floors and carpet tiles, but the underside has no studs, so on pile carpet a flat mat can creep. It suits hardwood, laminate, vinyl and tile.
Which side goes down?
One side is smooth and the other is textured. The supplier says to put the textured side down on a smooth floor and the smooth side down on a textured floor.
Will it lie flat?
It ships rolled, so it may curl when unpacked. The supplier advises warming it and pressing it flat under heavy objects for 3 to 5 days.
Where does it ship from?
A US warehouse.
Why use a chair mat?
Caster wheels roll over the same spot many times a day and can grind grit into the finish. A mat takes that wear instead. Our guide to the best chair mat for hardwood floor compares the options.











