No scrape. No scuff. No noise.Free US shipping until Dec 31
Wear resistant chair leg caps with a tan base pad: a brown square cap on a square oak leg
All 16 brown round chair leg caps from one pack, each on a tan base pad that looks like cork
Clear round cap with a tan, cork-look base pad on a wooden dining chair leg on a hardwood floor
Hand pushing a brown round cap onto the leg of a chair laid on its side, other legs already capped
All 16 clear round chair leg caps from one pack, each on a tan base pad that looks like cork
Clear square cap with a tan, cork-look base pad on a square oak table leg on a gray tile floor
The two shapes and two colors side by side: clear round, brown round, clear square and brown square caps

Wear Resistant Chair Leg Caps with Tan Base Pads

16 caps of one size and color, each with a tan base pad, for 4 chairs

$36.99 · Free US shipping until Dec 31

Slip-on caps for the bottom of round or square chair legs, each with a tan pad on the base that slides on hard floors. Pick the shape and leg size, then clear to let the wood show or brown to match mid-brown wood.

  • 16 caps per pack, one size and color: enough for 4 chairs
  • Round legs 19-25 or 30-40 mm; square legs 19-25 or 35-45 mm
  • Tan base pad on every cap, for hardwood, laminate, vinyl and tile
  • Push on by hand: no glue, nails or screws
SizeHow to measure
Color

Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.

  • Secure checkout: pay with PayPal, Shop Pay or card
  • Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
  • 30-day refund policy · Size guide
American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay Visa

Wear resistant chair leg caps slip over the bottom of a chair leg so a tan base pad, not the bare wood, meets your floor. Each pack holds 16 caps of one size and color, enough for four chairs. They come in two shapes, round and square, and two colors: clear, which lets the wood show through, and a warm medium brown.

Comparing options? See all chair leg caps, the square chair leg caps for square legs, or the wider range of chair leg floor protectors. Not sure of your size? Our guide on how to measure chair legs for protectors takes two minutes.

Sizes and what is in the pack

Each size is the leg it fits, measured across the very bottom of the leg. Every pack has 16 caps.

Shape Fits legs of Colors
Round 19-25 mm (0.75-0.98 in) across Clear, Brown
Round 30-40 mm (1.18-1.57 in) across Clear, Brown
Square 19-25 mm (0.75-0.98 in) per side Brown
Square 35-45 mm (1.38-1.77 in) per side Clear, Brown

How to choose the right size

Turn the chair over and measure the end of the leg, not the middle, because many legs taper toward the floor. For a round leg, measure straight across the center. For a square leg, measure one side from edge to edge.

Pick the range your number falls in. A leg near the top of a range fits snugly; a leg near the bottom sits a little looser. If your leg is round and 26 to 29 mm, or square and 26 to 34 mm, none of these sizes fit it.

How to fit them

  1. Wipe the leg end clean and dry.
  2. Turn the chair on its side or upside down.
  3. Line the cap up with the leg and push it straight on until the leg end reaches the bottom of the cap.
  4. Stand the chair up and check that all four base pads sit flat on the floor.

There is no glue, nail or screw, so a cap comes off by pulling it straight off the leg.

Where they work, and honest limits

The tan base pad slides on hardwood, laminate, vinyl and tile, so chairs move without the bare leg dragging across the floor. The supplier does not name the pad material, so we describe it by what you can see. The cap also wraps the bottom edge of the leg, so the leg end itself never touches the floor.

  • Carpet: the base pad does not glide well on carpet. These caps are made for hard floors.
  • Grit: the pad can pick up sand and crumbs over time. Check the bases now and then and wipe them clean.
  • Angled legs: the caps are straight cups. On legs that splay out, the pad can rest on one edge. Our angled chair leg floor protectors have a sole set at 15 degrees, and chair leg socks stretch to the angle instead.
  • Other sizes: for legs between our ranges, or for metal tube legs, see all chair leg caps.
  • Keeping a chair still: the base pad is made to slide. To stop a chair or stool from moving, look at chair stoppers.

Clear or brown?

Clear caps keep the look of the leg; you see the wood through the cap and the tan base pad underneath. Brown caps hide the leg end and suit walnut, cherry and other mid-brown woods. Square 19-25 mm comes in brown only, because the supplier does not make it in clear.

Questions

Which sizes are there?

Round 19 to 25 mm (0.75 to 0.98 in) and 30 to 40 mm (1.18 to 1.57 in), in clear or brown. Square 35 to 45 mm (1.38 to 1.77 in), in clear or brown. Square 19 to 25 mm (0.75 to 0.98 in), in brown only. Measure across the bottom of the leg, where it meets the floor.

Do they slide?

Yes. The tan base pad slides on hardwood, laminate, vinyl and tile. It is made for hard floors and does not glide well on carpet.

What is the base pad made of?

The supplier does not name the pad material, so we describe what you can see: a light tan pad that covers the base of every cap, clear or brown. It is the only part of the cap that touches the floor when the leg stands straight.

How many come in a pack?

16 caps of one size and color, enough for four chairs with four legs each.

Why is square 19 to 25 mm brown only?

The supplier makes that size only in brown. Clear square caps come in the 35 to 45 mm size.

My leg is between two sizes. What now?

These caps do not fit round legs of 26 to 29 mm (about 1 to 1.15 in) or square legs of 26 to 34 mm. For a round leg in that gap, our felt bottom chair leg covers come in a 22 to 32 mm size. For other shapes and sizes, see all chair leg caps.

Will they fit legs that splay out at an angle?

They are straight cups, so they sit flattest on legs that meet the floor straight. For splayed legs, our angled chair leg floor protectors have a sole set at 15 degrees, and chair leg socks stretch to the angle.

More in Chair Leg Caps by Leg Shape

See all Chair Leg Caps by Leg Shape

Cart • 0 items

Loading your bag…