Tube Leg Caps, 4 Pack
4 clear caps of one size per pack, for one table or stool
$13.99 · Free US shipping until Dec 31
Clear cups that slip over the bottom of round or square metal tube legs on tables and stools. The leg end sits inside the cap, so bare metal no longer touches the floor. Each pack is 4 caps of one size, enough for one four-legged table or stool.
- 4 caps per pack, all the same size: one four-legged table or stool
- Round 16 or 30 mm; square 20, 25 or 30 mm
- Clear silicone cup with a closed bottom, no felt
- Slips over the outside of the leg end, no glue or tools
Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.
- Secure checkout: pay with PayPal, Shop Pay or card
- Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
- 30-day refund policy · Size guide
Tube leg caps slip over the bottom of round and square metal tube legs, so the bare metal end sits in a clear cup instead of on your floor. Each pack holds 4 caps of one size, enough for one four-legged table or stool. The caps are clear, so the leg color still shows through.
Shopping for other styles? See all metal chair leg caps and chair tips, or read how to measure chair legs for protectors before you order.
Sizes
| Shape | Fits a leg of | Order |
|---|---|---|
| Round | 16 mm (0.63 in, about 5/8 in) across | Round 16 mm |
| Round | 30 mm (1.18 in, about 1 3/16 in) across | Round 30 mm |
| Square | 20 x 20 mm (0.79 in, just over 3/4 in) | Square 20 mm |
| Square | 25 x 25 mm (0.98 in, just under 1 in) | Square 25 mm |
| Square | 30 x 30 mm (1.18 in, about 1 3/16 in) | Square 30 mm |
Every pack is 4 caps of one size. Order one pack for each table or stool, and if your furniture has two leg sizes, order one pack of each size.
How to choose the right size
- Turn the table or stool over, or tip it on its side.
- Measure across the outside of the leg end with a ruler or caliper. For a round tube, measure the full width through the center. For a square tube, measure one flat side.
- Pick the cap with the same number.
The caps are firm and hold their shape, so they do not stretch to fit a leg that is a size too big, and a leg that is much smaller will sit loose. If your leg is not one of the five sizes above, see the other options below.
How to fit them
- Wipe the leg end clean and dry.
- Line the open side of the cap up with the leg, corners to corners on a square tube.
- Press the cap straight on until the leg end touches the bottom of the cup. No glue, nails or tools are needed.
- Stand the furniture up and check that it sits level.
Because the cap fits over the outside of the leg, it works on hollow tube and on solid legs of the same size, metal or wood.
Where they work, and where they do not
These caps suit metal tables, desks, stools and shelving with round or square tube legs on tile, vinyl, laminate, hardwood and concrete. The clear silicone grips the floor more than felt does, so furniture is less likely to shift, and the metal no longer scrapes or clicks on hard tile.
That grip is also the main limit. If you want chairs to glide across the floor, a felt base slides better: see felt lined metal chair leg caps. If you would rather fill an open tube end than cover it, chair leg plugs push inside a round tube. For bigger legs (round 38, 50 or 60 mm, square 38 to 60 mm), see large furniture leg caps, and for rectangular tube, see patio chair leg caps, rectangular. Round tube between 19 and 25 mm is covered in the wider metal chair leg caps range.
Grit caught under any cap can still mark a soft floor, so sweep now and then and check the caps for wear.
Questions
How do I measure?
Measure across the outside of the leg end. For round tube, measure the full width through the center; for square tube, measure one side. Pick the cap with the same number. Our size guide shows how.
What are they made of?
Clear silicone, as the supplier lists them. The caps are firm enough to hold their shape, and they have no felt base.
Do they slide?
Not as easily as felt. Clear silicone grips a hard floor more than felt does, so they suit tables and stools that mostly stay in place. If you want chairs to glide, choose felt lined metal chair leg caps.
How many come in a pack?
4 caps, all the same size. That covers one table or stool with four legs. Order one pack for each table or stool, and for two leg sizes, order one pack of each size.
Do they fit wooden legs too?
Yes, if the leg end has the same outside size. The cap slips over the outside of the leg, so it works on solid wood as well as metal tube. For thick wooden dining and coffee table legs, see all table leg caps.
Will the caps hide the leg color?
No. They are clear, so the color of the leg shows through.












