Felt Bottom Chair Leg Covers
16 covers with felt bottoms, one size per pack
$16.99 · Free US shipping until Dec 31
Stretchy TPE cups with a felt disc on the base that pull over the foot of round chair, stool and table legs. Three sizes for legs 16 to 40 mm wide, in brown or clear.
- 16 covers per pack, one size and one color
- Fits round legs 16-22, 22-32 or 30-40 mm (5/8 to 1 9/16 in) wide
- Felt disc fixed across the base of every cover
- Pulls on by stretch: no glue, nails or tools
Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.
- Secure checkout: pay with PayPal, Shop Pay or card
- Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
- 30-day refund policy · Size guide
Felt bottom chair leg covers pull over the foot of a round chair, stool or table leg so that felt, not the leg, touches the floor.
Each cover is a small cup of stretchy TPE with a felt disc fixed across its base. A pack holds 16 covers, enough for four chairs or stools.
Comparing styles? Browse all chair leg covers, bar stool leg caps and chair leg caps, or read how to measure chair legs for protectors before you order.
Sizes and what is in the pack
| Size | Round leg width | Inches (tape measure) |
|---|---|---|
| S | 16-22 mm | 5/8-7/8 in |
| M | 22-32 mm | 7/8-1 1/4 in |
| L | 30-40 mm | 1 3/16-1 9/16 in |
Every pack has 16 covers of one size and one color. Brown is a see-through light brown tint. Clear is fully see-through. Both colors have a tan-brown felt base.
How to choose the right size
Measure straight across the bottom of the leg, where it touches the floor, with a ruler or calipers. Pick the size whose range includes your number.
The ranges overlap at 22 mm and from 30 to 32 mm. In an overlap, the smaller size stretches more and grips tighter, while the larger size goes on more easily.
How to fit them
- Wipe the end of the leg clean and dry.
- Lay the chair on its side or turn it upside down.
- Stretch the rim open with both hands and pull the cover over the end of the leg.
- Push it on until the leg end sits flat on the floor inside the cover.
- Stand the chair up and check that it sits level.
No glue, nails or tools are needed, and a cover pulls off again the same way.
Where they work and their limits
These covers suit chairs, counter stools, side tables and plant stands with straight round legs on hardwood, laminate, vinyl plank and tile. The felt slides over a hard floor, and the soft wall wraps the edge of the leg foot.
Some legs need something else:
- Legs wider than 40 mm: large furniture leg caps come in round sizes of 38, 50 and 60 mm. Each cap fits one leg width, so measure first.
- Splayed legs: felt sits flat only when the leg meets the floor straight. For legs that land at an angle, angled chair leg floor protectors have a 15 degree sole.
- Square legs: the maker lists sizes M and L for square legs too, but a round cup stretches at the corners. Square chair leg caps fit the shape.
- No felt wanted: if you would rather the chair stay put than slide, silicone chair leg covers have no felt base.
- Legs thinner than 16 mm: the S size will not grip them. Pick a smaller cap from chair leg caps.
Felt picks up grit over time. Wipe the base now and then so it keeps sliding cleanly.
Questions
Which size do I need?
Measure across the bottom of the leg where it touches the floor. S fits round legs 16 to 22 mm wide, M 22 to 32 mm and L 30 to 40 mm. The size guide shows how to measure.
What are they made of?
Stretchy TPE (thermoplastic elastomer), a soft rubber-like plastic, with a felt disc fixed across the bottom.
Do they work as stool leg covers?
Yes. As stool leg covers they fit round stool legs 16 to 40 mm wide that meet the floor straight. For stool legs that splay out, angled chair leg floor protectors sit flatter.
Brown or clear?
Both colors have the same tan felt base, sizes and price. Brown is a see-through light brown tint that blends with wood legs. Clear lets the leg color show through, so it suits white, painted or metal legs.
Do they fit square legs?
The maker lists sizes M and L for square legs with 22 to 32 and 30 to 40 mm sides, but a round cover stretches at the corners. Square chair leg caps fit square legs better.
How do I put them on?
Stretch the rim open and pull the cover over the end of the leg until the leg sits flat inside. No glue or tools are needed.











