Large Furniture Leg Caps
4 clear caps of one size, felt underneath
$14.99 · Free US shipping until Dec 31
Clear PVC cups that slip over the bottom of large round or square table and sofa legs, with a felt pad underneath so the furniture slides instead of scratching. Each pack holds 4 caps of one size, enough for one four-legged table, sofa or cabinet.
- 4 caps of one size: one four-legged table, sofa or cabinet
- Round 38, 50, 60 mm or square 38, 40, 50, 60 mm inside size
- Clear PVC cup with a black felt pad underneath
- Slips on: no glue, nails or screws
Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.
- Secure checkout: pay with PayPal, Shop Pay or card
- Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
- 30-day refund policy · Size guide
Large furniture leg caps slip over the bottom of thick table, sofa and cabinet legs and put a felt pad between the leg and the floor.
Each cap is a clear PVC cup with a black felt pad fixed underneath. The furniture slides on hard floors instead of scraping them, and the clear cup lets the leg show through.
The caps come in exact sizes for large legs: round 38, 50 and 60 mm and square 38, 40, 50 and 60 mm. One pack holds 4 caps of the size you choose, enough for one four-legged table, sofa or cabinet.
Browse more furniture leg protectors, table leg caps and chair leg floor protectors. Not sure of the size? Our guide on how to measure chair legs for protectors works for table and sofa legs too.
Sizes
| Shape | Cap inside size | On an inch tape |
|---|---|---|
| Round | 38 mm (1.50 in) | 1 1/2 in |
| Round | 50 mm (1.97 in) | just under 2 in |
| Round | 60 mm (2.36 in) | about 2 3/8 in |
| Square | 38 x 38 mm (1.50 in) | 1 1/2 in a side |
| Square | 40 x 40 mm (1.57 in) | about 1 9/16 in a side |
| Square | 50 x 50 mm (1.97 in) | just under 2 in a side |
| Square | 60 x 60 mm (2.36 in) | about 2 3/8 in a side |
Every pack holds 4 caps of the size you choose. For pieces with different leg sizes, order one pack of each size. For thin steel tube legs, the same clear cap with a felt pad comes in 16 to 25 mm among our plastic chair leg caps.
How to choose the right size
The size is the inside size of the cap, so it should match the leg itself. Measure across the very bottom of the leg, where the cap will sit, with a ruler or a caliper.
- Round legs: measure the diameter straight across the middle.
- Square legs: measure one flat side, edge to edge, not corner to corner.
- Between sizes: the caps come in these exact sizes only. A leg clearly bigger than the cap will not go in, and a cap much bigger than the leg will sit loose, so a 45 mm leg fits none of them.
How to fit them
- Wipe the bottom of each leg clean and let it dry.
- Tip the table onto its side on a soft rug, or lift one corner of the sofa at a time. Ask for help with heavy pieces.
- Push a cap onto the leg end until the leg touches the floor of the cup. The soft PVC flexes a little to go on. No glue, nails or screws are needed.
- Stand the furniture upright and check that each felt pad sits flat on the floor.
Where they work and their limits
Felt slides on hardwood, laminate, tile and vinyl, so these caps suit dining tables, sofas, cabinets, beds and desks that get pulled out for cleaning or moved around the room. On carpet the felt does little, so these caps are for hard floors.
Some legs are not a good match:
- Angled legs: on legs set at a slant, the cup tilts and the felt lands on its edge instead of flat.
- Thin legs under 38 mm: see table leg caps and chair leg floor protectors for smaller sizes.
- Furniture that should not move, or legs wider than 60 mm: see the grippers and furniture cups in furniture leg protectors.
Felt wears with use. Check the pads now and then, more often on furniture that is moved every day.
Questions
What size legs do they fit?
Round legs of 38, 50 or 60 mm (1.50, 1.97 or 2.36 in) and square legs of 38, 40, 50 or 60 mm (1.50, 1.57, 1.97 or 2.36 in) a side. Each size is the inside size of the cap, so measure the bottom of the leg and choose the same size. The size guide shows how to measure.
Do they fit square legs?
Yes. Choose a square size that matches one flat side of the leg, measured edge to edge, not corner to corner.
Do they slide?
Yes. The felt pad under each cap slides smoothly and quietly on hardwood, laminate, tile and vinyl. If you want the furniture to stay put instead, see our non slip furniture grippers.
How many come in a pack?
4 caps, all the same size: enough for one four-legged piece, such as a dining table, an end table or a sofa. Pieces with different leg sizes need one pack of each size, and a six-legged sofa needs two packs.
What if my leg is between sizes?
The caps come in exact sizes only, so a 45 mm leg fits none of them. A leg clearly bigger than the cap will not go in, and a cap much bigger than the leg sits loose. Stick-on furniture pads can be cut to any leg shape instead.
Do I need glue to fit them?
No. The soft PVC cup slips over the end of the leg and holds by its fit. Clean the leg end first so the cap goes all the way on.












