
Furniture Pads: Felt Pads for Furniture Legs
Furniture pads go under the legs of tables, sofas, beds, cabinets and chairs so the legs do not scratch the floor. This collection holds four kinds: a pack of 101 self adhesive felt pads in round, square and rectangular sizes, packs of one felt pad size, a felt roll you cut to fit odd bases, and clear silicone grippers that stop heavy pieces creeping. The felt ones are felt floor protectors: the leg slides over hardwood, laminate, vinyl plank or tile and the felt takes the scrape instead of the floor.
Pick felt when the furniture should slide without marking the floor, and silicone when it should stay where you put it. For a plain leg with a flat end, start with the self adhesive furniture pads, or, when every leg is the same size, buy round and square felt pads by size, one size per pack. For sofa plinths, bed rails and odd-shaped feet, cut felt for bottom of furniture from the roll.
Dining chairs that are dragged every day need a protector that stays on: chair leg floor protectors slip over the leg, and felt chair pads compares nail-on, slip-on and stick-on felt for chairs. Looking for moving blankets? We do not sell those.
How to choose furniture pads
Start with two questions: should the piece slide or stay put, and what shape is the bottom of the leg where it touches the floor?
| Type | Fits | Floor | Attaches by |
|---|---|---|---|
| Self adhesive felt pads, 101 pieces, beige or brown | Flat leg ends: round 22 to 45 mm (0.87 to 1.77 in), square or rectangular, plus one 150 x 97 mm sheet to cut | Hardwood, laminate, vinyl plank, tile | Peel-off adhesive back |
| Round and square felt pads by size, beige, 10 to 90 per pack | Flat leg ends: round 27 or 40 mm (1.06 or 1.57 in), rectangles 40 x 28 or 84 x 42 mm, square 85 x 85 mm (3.35 in) | Hardwood, laminate, vinyl plank, tile | Peel-off backing |
| Felt roll, gray, 100 cm (39.4 in) long | Plinths, runners, bed rails and odd shapes, 4 to 10 cm (1.6 to 3.9 in) wide | Hardwood, laminate, vinyl plank, tile | Cut with scissors, peel-off adhesive back |
| Clear silicone grippers, 4 pack | Sofa, bed and table legs, round or square, 60 or 80 mm (2.36 or 3.15 in) | Hardwood, laminate, vinyl plank, tile | Peel off the clear film, press onto the leg |
All four go on a flat base: the bottom of a leg, a plinth or a runner. They are not made for the open tube ends of metal chairs; those need caps or plugs.
Felt or silicone
Felt is soft and smooth, so a table or cabinet slides over the floor without scraping it. Use it on furniture you move now and then: side tables, sofas, cabinets, beds and desks.
Silicone does the opposite. The clear 3 mm (0.12 in) grippers make sofas, beds and tables much less likely to creep when someone sits down or leans on them, and the floor shows through. Do not put them under chairs you slide in and out, because they are made to stop movement.
How to measure
- Lift one leg and measure across the bottom where it touches the floor. On a tapered leg, measure the end, not higher up.
- Felt pads: pick a pad the same size as the leg end or slightly smaller, so no felt sticks out and catches. The pack has round pads of 22, 28 and 45 mm, squares of 22 and 45 mm, and rectangles of 30 x 27 and 47 x 27 mm. The single-size packs hold 27 or 40 mm rounds, 40 x 28 or 84 x 42 mm rectangles, or 85 x 85 mm squares.
- Felt roll: pick the width closest to the leg end or the depth of the plinth edge. Stand the leg on the white liner, trace around it and cut before you peel.
- Grippers: pick a pad at least as wide as the leg end. The 60 mm size suits bases up to about 55 mm (2.2 in), the 80 mm size bases up to about 75 mm (3 in).
Our guide on how to measure chair legs for protectors shows where to put the ruler on round and square legs; table, sofa and cabinet legs measure the same way.
What these pads will not do
- Stay on dragged chairs. Stick-on felt can peel when a chair is pulled in and out many times a day. For those, chair leg caps slip over the leg, and nail-on felt chair glides fix into wooden legs.
- Stay clean forever. Grit caught in felt can scratch the floor. Replace a pad when it is worn flat or dirty.
- Stick to a dusty leg. Dust and old glue stop the adhesive bonding. Clean and dry the leg first.
- Move heavy furniture across a room. These are not moving pads. For that job, use furniture sliders.
Related guide: how to make chair leg floor protectors at home from a felt roll or sheet.
Furniture Pads: Felt Pads for Furniture Legs: questions and answers
Are these furniture pads for moving?
No. These are felt pads that stick under furniture legs to protect floors, plus silicone grippers. Moving blankets are also called furniture pads; we do not stock them. To slide heavy furniture across a room, see <a href="/collections/furniture-sliders">furniture sliders</a>.
Why do stick-on felt pads fall off chair legs?
Chairs are dragged sideways many times a day, which peels the adhesive. On chairs, slip-on <a href="/collections/chair-leg-caps">chair leg caps</a> or nail-on <a href="/products/felt-chair-glides-nail-on">felt chair glides</a> stay on longer.
What size felt pad do I need?
Choose a pad slightly smaller than the bottom of the leg, so no edge overhangs and catches. The 101-piece pack runs from 22 mm (0.87 in) to 45 mm (1.77 in), the single-size packs go up to an 85 x 85 mm (3.35 in) square, and the large sheet and the felt roll can be cut to any shape. Our guide on <a href="/pages/size-guide">how to measure chair legs for protectors</a> shows how, and the method is the same for any leg.
How do I make felt pads stay on?
Clean and dry the leg, press the pad on firmly for 30 seconds, and wait a few hours before sliding the furniture so the adhesive can set.
Are felt floor protectors the same as furniture pads?
Yes, when the furniture pads are felt. Felt floor protectors stick under a leg so it slides over hardwood, laminate, vinyl plank or tile without scratching. Here they come as a 101-piece mixed pack, <a href="/products/round-and-square-felt-pads">round and square felt pads by size</a> and a felt roll to cut.
Felt pads or silicone grippers?
Felt lets furniture slide without scratching the floor. The clear silicone grippers stop it sliding. Use felt on pieces you move now and then, and grippers under sofas, beds and tables that creep on a hard floor.
Can I cut felt pads to fit?
Yes. Any felt pad trims with ordinary scissors. For an odd shape, cut it from the 150 x 97 mm sheet in the assortment or from the roll of <a href="/products/felt-for-bottom-of-furniture-self-adhesive-roll">felt for bottom of furniture</a>, which comes 4 to 10 cm (1.6 to 3.9 in) wide.





