No scrape. No scuff. No noise.Free US shipping until Dec 31
Furniture leg extenders in plastic, close-up of the felt pad and ribbed grip ring in natural wood color
Pack of 4 natural wood color leg extenders, three felt side up and one showing its white adhesive top
Natural wood color leg extenders under the wooden legs of a sideboard on a tile floor
Hand placing a leg extender under a wooden leg, white adhesive disc facing up and felt base on the floor
Three leg extender heights side by side in natural wood color: 5 cm, 7.5 cm and 10 cm
Pack of 4 black leg extenders with black felt pads, one turned to show the white adhesive top

Furniture Leg Extenders, Adjustable Height

4 adjustable extenders of one height and color, one pack

$25.99 · Free US shipping until Dec 31

Round plastic extenders that lift a cabinet, sofa, bed or table by 4.5 to 10.5 cm (1.8 to 4.1 in), depending on the size you pick. The adhesive top sticks to the leg, the felt base rests on the floor, and a twist of the ribbed ring fine-tunes the height.

  • 4 extenders per pack, all one height and color
  • Twist to adjust: 4.5-5.5, 7-8 or 9-10.5 cm
  • Adhesive top sticks to the leg, felt base on the floor
  • 60 mm (2.36 in) across, natural wood color or black
Height
Color

Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.

  • Secure checkout: pay with PayPal, Shop Pay or card
  • Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
  • 30-day refund policy · Size guide
American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay Visa

Furniture leg extenders raise a cabinet, sideboard, sofa, bed or table without changing its legs. Each round plastic riser goes under one leg: the leg sticks to the adhesive top, and a felt pad on the base rests on the floor. Twist the ribbed ring to fine-tune the height within the size you choose.

Raising seating? See all chair leg extenders, including clamp-on chair risers for square legs. Not sure how wide your legs are? Read how to measure chair legs for protectors.

Sizes and what is in the pack

Size Height range Weight each
5 cm (2 in) 45 to 55 mm (1.77 to 2.17 in) About 60 g
7.5 cm (3 in) 70 to 80 mm (2.76 to 3.15 in) About 75 g
10 cm (4 in) 90 to 105 mm (3.54 to 4.13 in) About 90 g

Every size is 60 mm (2.36 in) across. A pack holds 4 risers of one height and one color: natural wood color (a plain tan plastic with no wood grain) or black. Each riser has a self adhesive disc on top and a felt pad on the base, in a felt color that goes with the plastic.

How to choose a height

Measure from the floor to the underside of the furniture, then decide how much higher you want it. The leg stands on top of the riser, so the furniture rises by the full height of the riser.

The 5 cm size suits a small lift, such as clearing a rug edge or making room for a robot vacuum that only just fails to fit. The 7.5 cm and 10 cm sizes suit raising a low sofa, bed or desk to a more comfortable height, or making storage space underneath. For a fixed 2 in lift that matches a square leg, our 2 inch furniture risers come in square as well as round, for flat feet about 40 mm (1.57 in) across or less.

Then check the foot of each leg. It needs a flat bottom that sits fully on the adhesive top, which is a little narrower than the 60 mm body.

Round, tapered and square legs all work when the flat foot fits on that disc. A leg that ends in a point, a ball, a caster or a slanted foot will not sit flat.

How to fit them

  1. Twist the ribbed ring to set each riser to the height you want. Set all four the same, or turn one slightly to level a piece that rocks.
  2. Clean the bottom of each leg and let it dry. Dust and old glue stop the adhesive from holding.
  3. Peel the backing off the adhesive disc on top of the riser.
  4. Lift the furniture, center a riser under each leg with the felt side down, and lower the leg onto it. Press down so the adhesive takes hold.
  5. Leave the furniture in place for a few hours before you use it, so the adhesive can set.

Where they work, and their limits

These extenders suit furniture that stays where it is: cabinets, sideboards, sofas, beds, desks and tables on hardwood, laminate, vinyl or tile. The felt base keeps the hard plastic off the floor.

Nothing clamps the leg, so the adhesive is all that holds it in place. Lift the furniture to move it rather than dragging it, or a riser can twist off its leg. The maker does not state a maximum load, so on a heavy piece check that every riser sits square and steady before you load it.

For chairs that are pulled out at every meal, clamp-on chair risers grip square legs from the side. If you only want to protect the floor without adding height, see our furniture protectors.

Questions

How much height do they add?

The full height of the riser, since the leg stands on top of it. Each size adjusts within a range: 4.5 to 5.5 cm (1.8 to 2.2 in), 7 to 8 cm (2.8 to 3.1 in) or 9 to 10.5 cm (3.5 to 4.1 in). Twist the ribbed ring to set it.

What legs do they fit?

Legs with a flat foot that sits fully on the adhesive top, which is a little narrower than the 60 mm (2.36 in) body. Legs that end in a point, ball or caster will not sit flat. See how to measure chair legs for protectors.

How do they attach?

A self adhesive disc on top sticks to the bottom of the leg. Nothing clamps the leg, so lift the furniture to move it instead of dragging it. For square chair legs, clamp-on chair risers hold better.

Will they scratch a hardwood floor?

The base that touches the floor is a felt pad, so the plastic does not rest on the floor. Keep the felt free of grit, which can scratch.

Can I use them to level a wobbly table?

Yes, within each size range. Set the riser under the short leg a few millimeters higher than the others until the table stops rocking.

How many come in a pack?

4 risers of one height and one color, enough for one four-legged piece of furniture.

More in Chair Leg Extenders

See all Chair Leg Extenders

Cart • 0 items

Loading your bag…