No scrape. No scuff. No noise.Free US shipping until Dec 31
Felt for bottom of furniture, close-up of the cut end of the gray felt strip with a corner of its white liner peeled back
One roll of gray self-adhesive felt, white liner on the outside and the end unrolled
Thin gray felt cut from the roll under a wooden sofa base on a hardwood floor
Hand placing a square of gray felt cut from the roll onto the bare end of an upturned chair leg
Five gray felt rolls in a row, from the 4 cm width to the 10 cm width

Felt for Bottom of Furniture, Self-Adhesive Roll

1 roll of gray felt, 100 cm (39.4 in) long

$20.99 · Free US shipping until Dec 31

A roll of self-adhesive gray felt that you cut to fit the bottom of any furniture. Pick a width from 4 cm to 10 cm (1.6 to 3.9 in); every roll is 100 cm (39.4 in) long.

  • One roll, 100 cm (39.4 in) long
  • Five widths: 4, 5, 6, 8 or 10 cm (1.6 to 3.9 in)
  • Self-adhesive back under a peel-off liner
  • Gray felt that cuts with ordinary scissors
Width

Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.

  • Secure checkout: pay with PayPal, Shop Pay or card
  • Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
  • 30-day refund policy · Size guide
American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay Visa

Felt for bottom of furniture is sold here as one self-adhesive roll, 100 cm (39.4 in) long, in the width you pick from 4 cm to 10 cm (1.6 to 3.9 in). Cut it with scissors to the shape of the base, peel off the white liner and press it on. It is made for the bases that ready-made pads do not fit: sofa plinths, cabinet runners, platform bed bases and odd-shaped feet.

Prefer pads that are already cut? See our self adhesive furniture pads, or browse all furniture pads and furniture pads for hardwood floors.

Widths and what one roll covers

Every option is one roll of gray felt on a white peel-off liner. Only the width changes.

Width Roll size Squares per roll
4 cm (1.6 in) 4 x 100 cm (1.6 x 39.4 in) 25
5 cm (2 in) 5 x 100 cm (2 x 39.4 in) 20
6 cm (2.4 in) 6 x 100 cm (2.4 x 39.4 in) 16
8 cm (3.1 in) 8 x 100 cm (3.1 x 39.4 in) 12
10 cm (3.9 in) 10 x 100 cm (3.9 x 39.4 in) 10

Squares per roll assumes square pieces as wide as the strip, cut end to end with no offcuts. A 4 cm roll gives 25 squares of 4 x 4 cm, and a 10 cm roll gives 10 squares of 10 x 10 cm.

How to choose a width

Measure the part of the furniture that touches the floor. For a leg, measure across its bottom end. For a plinth or runner, measure the depth of its bottom edge.

  • Small leg ends, up to 4 cm (1.6 in): the 4 cm roll gives the most pieces.
  • Plinths and runners: pick the width closest to the edge depth, or the next width up and trim it.
  • Long edges: one roll covers 100 cm (39.4 in) of edge. Measure the length you want to cover and order one roll for every 100 cm, or felt only the corners.
  • Bases wider than 10 cm (3.9 in): lay two strips side by side.

Not sure how to measure? Our size guide shows where to put the ruler.

How to fit it

  1. Clean the bottom of the furniture and let it dry. Dust and old glue stop the adhesive from holding.
  2. For a leg, stand it on the white liner side of the strip and trace around it with a pen, so the cut piece matches the base exactly. For a plinth or runner, measure the length and mark it on the liner.
  3. Cut along the line with ordinary scissors while the liner is still on.
  4. Peel off the liner, press the felt onto the base and hold it firmly for 30 seconds.
  5. Wait a few hours before sliding the furniture so the adhesive can set.

Our guide to making your own chair leg floor protectors adds tips such as cutting just inside the line and rounding the corners so the felt is less likely to peel.

Where it works, and its limits

As felt for furniture, it sits between a hard base and a hard floor, so the furniture slides on felt instead of scraping. It suits pieces that move now and then on hardwood, laminate, vinyl and tile: sofas, sideboards, bookcases, beds and desks.

It is less suited to chairs that are dragged in and out many times a day. Stick-on felt can wear or peel there, and a cap that grips the leg stays on longer. See chair leg caps for those.

Felt also lets furniture slide, so it will not hold a piece in place. To stop a chair or sofa from moving, see chair stoppers. Grit can collect in felt over time, so check the pieces now and then and cut fresh ones from the roll when they wear.

Questions

How wide is the widest roll?

10 cm (3.9 in). For a wider base, lay two strips side by side.

How long is each roll?

100 cm (39.4 in) in every width. One order is one roll.

How do I cut it?

With ordinary scissors, before you peel off the liner. For a leg, stand it on the white liner and trace around it for an exact fit.

What is it for?

Bases that ready-made pads do not fit: sofa plinths, cabinet runners, platform bed bases and odd-shaped feet. For plain round or square legs, precut felt pads save the cutting.

What color is the felt?

Gray, on a white peel-off liner. Gray is the only color.

Will it stay on dining chairs?

Stick-on felt can peel on chairs that are dragged every day. For those, chair leg caps grip the leg and stay on longer.

More in Furniture Pads: Felt Pads for Furniture Legs

See all Furniture Pads: Felt Pads for Furniture Legs

Cart • 0 items

Loading your bag…