No scrape. No scuff. No noise.Free US shipping until Dec 31
Cat paw chair leg covers in brown silicone on a wooden chair leg, close-up of the toes and thin rim
Four brown silicone cat paw covers, one chair set, laid out in two rows of two on white
Wooden chair on a hardwood floor with brown cat paw covers on its legs, seen from floor level
One hand holding a brown cat paw cover by its paw while the other guides a round wooden chair leg into it
Underside of a brown cat paw cover on a chair leg, showing the raised paw print pads
Green silicone cat paw covers, one fitted on a wooden chair leg and three beside it on a wood floor

Cat Paw Chair Leg Covers in Silicone

4 silicone covers, one size and color, for one chair

$12.99 · Free US shipping until Dec 31

Soft silicone covers shaped like cat paws that slip over the feet of round chair and table legs. Pick S for legs 25 to 30 mm (0.98 to 1.18 in) across or M for 30 to 35 mm (1.18 to 1.38 in), in brown or green.

  • 4 covers per pack, one for each leg of a chair
  • Round legs: S fits 25-30 mm (0.98-1.18 in), M fits 30-35 mm (1.18-1.38 in)
  • Molded silicone with a paw print underneath, no felt
  • Stretch-on fit: no glue, nails or tools
SizeHow to measure
Color

Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.

  • Secure checkout: pay with PayPal, Shop Pay or card
  • Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
  • 30-day refund policy · Size guide
American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay Visa

Cat paw chair leg covers slip over the bottom of round chair and table legs so the floor touches soft silicone instead of bare wood or metal.

Each cover is molded as a small cat paw, with three rounded toes at the front and a paw print on the underside. This pack holds 4 covers in one size and one color, enough for one chair.

Want more options? Browse all silicone chair leg protectors, compare the knit cat paw chair leg socks, or read how to measure chair legs for protectors before you order.

Sizes and what is in the pack

Size Fits round legs Cover (H x L x W)
S 25 to 30 mm (0.98 to 1.18 in) 30 x 35 x 30 mm (1.18 x 1.38 x 1.18 in)
M 30 to 35 mm (1.18 to 1.38 in) 35 x 40 x 35 mm (1.38 x 1.57 x 1.38 in)

Every pack: 4 covers of the size and color you pick, brown or green, one for each leg of one chair. The length (L) is longer than the width because the toes stick out a little at the front.

How to choose the right size

Measure straight across the bottom of the leg, where the cover will sit, not higher up. Many legs taper, so the foot can be thinner than the top.

  • 25 to 30 mm across: choose S.
  • 30 to 35 mm across: choose M.
  • Exactly 30 mm: either fits. S sits tighter, M goes on more easily.

These covers are round. For square legs see square chair leg caps, and for round legs of 38, 50 or 60 mm see large furniture leg caps.

How to fit them

  1. Tip the chair back or onto its side so the leg is off the floor.
  2. Wipe the end of the leg clean and dry.
  3. Stretch the rim of the cover with your fingers and pull it over the end of the leg.
  4. Push it on until the leg sits flat on the inside floor of the cover, with the toes facing forward.
  5. Stand the chair up and check that it does not rock.

No glue, nails or tools. To remove a cover, roll the rim down and pull it off.

Where they work and their limits

The covers suit wooden or metal round legs on dining chairs, children's chairs, stools, desks, side tables, nightstands and small shelves, on hardwood, laminate, vinyl and tile. They also hide worn or chipped leg ends.

The base is plain silicone with no felt pad. Silicone holds the floor more than felt does, so a chair drags rather than glides, and that grip is why they tend to stay where you put them.

If you want chairs that glide when pushed back, choose round felt chair leg caps instead.

Each cover adds the thickness of its silicone floor under the leg, so fit all four legs of a chair at the same time to keep it level. Legs that splay out at an angle may tilt the paw slightly, because the cup is straight.

Questions

Which size do I need?

Measure across the bottom of the leg. S fits round legs of 25 to 30 mm (0.98 to 1.18 in) and M fits 30 to 35 mm (1.18 to 1.38 in). See the size guide for how to measure.

How many come in a pack?

4 covers, all the same size and color, one for each leg of one chair. For four chairs, order four packs.

Do chairs slide on them?

Not like felt. The base is plain silicone, which holds the floor, so a chair drags rather than glides. For chairs that glide, use round felt chair leg caps.

Should I get the cat paw socks or these silicone paws?

The cat paw chair leg socks are knit fabric and slide across the floor. These covers are molded silicone, so they hold the floor and wipe clean.

Do they fit square legs?

No, these are round. For square legs see square chair leg caps.

More in Silicone Chair Leg Protectors

See all Silicone Chair Leg Protectors

Cart • 0 items

Loading your bag…