
Felt Chair Pads for Chair Legs
Felt chair pads, also called chair leg pads or chair foot pads, put a layer of felt between each chair leg and the floor, so the chair slides quietly instead of scratching. This collection holds five products: two kinds of stick-on felt pads, nail-on felt glides for wooden legs, and two slip-on caps with a felt base.
Pick by how often the chair moves. Stick-on pads suit chairs that are moved now and then. Dining and kitchen chairs that are pulled out many times a day keep their felt longer with a glide nailed into the leg or a cap that grips it.
For every type we sell, see all chair leg floor protectors, or go straight to our felt chair leg protectors for round legs. If you know the size of the leg end, our round and square felt pads by size come one size per pack, from 27 mm rounds to an 85 mm square.
Need pads for tables, sofas and cabinets too? Browse furniture pads, or start with the 101-piece pack of self adhesive furniture pads.
How to choose felt chair pads
Stick-on felt pads fit any flat leg end, round or square, but on a chair that is dragged every day they can peel off. Caps slip over the leg and grip it, so they stay on, and nail-on glides cannot peel, though they only work on wooden legs. If your chairs move all day, look at caps first, or compare all chair leg caps by leg shape.
| Type | Fits | Floor | Attaches by |
|---|---|---|---|
| Self adhesive felt pads, 101 pieces | Flat leg ends about 22 to 45 mm, or any shape cut from the sheet | Hardwood, laminate, vinyl, tile | Adhesive back |
| Round and square felt pads by size, 10 to 90 pads | Flat leg ends: 27 or 40 mm round, 40 x 28 or 84 x 42 mm rectangle, 85 mm square | Hardwood, laminate, vinyl, tile | Peel-off backing |
| Felt chair glides, nail-on, 100 pack | Solid wood legs with a flat end 20 mm or wider | Hardwood, laminate, vinyl, tile | Center nail |
| Felt-Base Leg Caps, 16 pack | Round legs 10 to 30 mm, in 4 sizes | Hardwood, laminate, tile | Slips over the leg |
| Chair Shoes, 16 pack | Round legs 16 to 40 mm, in 3 sizes | Hardwood, laminate, vinyl, tile | Slips over the leg |
None of these are made for carpet.
How to measure a chair leg
Turn the chair over and measure straight across the bottom of one leg, where it touches the floor, in millimeters if you can. Many legs taper, so measure at the very end. On a square leg, measure side to side, not corner to corner.
- Stick-on pads: choose a pad the same size as the leg end or a little smaller, so no felt hangs over the edge. The size packs come in 27 or 40 mm rounds, 40 x 28 or 84 x 42 mm rectangles and an 85 x 85 mm square.
- Nail-on glides: the leg end must be solid wood, flat and at least 20 mm (0.79 in) across.
- Caps: choose the size whose range includes your measurement. Felt-Base Leg Caps run XS 10 to 15, S 14 to 19, M 19 to 25 and L 25 to 30 mm. Chair Shoes run Small 16 to 22, Medium 22 to 32 and Large 30 to 40 mm. Both caps here are for round legs; for square legs, see square chair leg caps.
Our guide on how to measure chair legs for protectors walks through round and square legs step by step.
What felt will not do
- Felt picks up grit, and grit trapped in felt is what scratches a floor. Brush the felt clean now and then, and replace it once it is flat or worn through.
- Stick-on pads need a clean, flat base. They will not hold on open metal tube ends; use metal chair leg caps or push-in chair leg plugs there.
- Nail-on glides need solid wood to grip, and they leave a small nail hole when you pry one off.
- On legs that meet the floor at an angle, a flat pad sits on its edge. For splayed legs, choose angled chair leg floor protectors.
- A cap that is too big slips. If the size you choose does not fit, email support@scuffo.com within 30 days of delivery with your order number and a photo of one piece on the leg, and we send the correct size free.
Related guides: best chair leg floor protectors and how to stop chairs from scratching floors.
Felt Chair Pads for Chair Legs: questions and answers
Felt pads or caps for chair legs?
Stick-on chair leg pads fit any flat leg end, round or square, but can peel off when a chair is dragged every day. Caps slip over the leg and stay on. Nail-on felt glides also stay put, on wooden legs only.
Do felt chair pads work on metal legs?
Stick-on pads need a clean, flat base, and nail-on glides need wood. Open metal tube ends need caps that slip over the tube, such as our <a href="/collections/metal-chair-leg-caps">metal chair leg caps</a>, or <a href="/products/chair-leg-plugs-tube-inserts">chair leg plugs</a> that push in.
Do felt chair pads work on tile?
They work, but felt collects grit on tile and catches on grout lines, so it wears faster than on wood. Brush the felt clean often. More tips: <a href="/blogs/guides/how-to-protect-tile-floors-from-chairs">how to protect tile floors from chairs</a>.
What size felt chair pads do I need?
Measure across the bottom of one leg. Pick a stick-on pad the same size or a little smaller. Round and Square Felt Pads by Size come one size per pack: 27 or 40 mm rounds, 40 x 28 or 84 x 42 mm rectangles, or an 85 x 85 mm square. The nail-on glides are 20 mm across, for wooden legs at least that wide. Felt-Base Leg Caps fit round legs from 10 to 30 mm and Chair Shoes from 16 to 40 mm. Our guide on <a href="/pages/size-guide">how to measure chair legs for protectors</a> shows each step.
How many do I need?
One per leg, so a four-legged chair takes four. The 100-glide pack covers 25 chairs and a 16 pack of caps covers four. Clear Chair Shoes in Small or Medium also come in a 32 pack, enough for eight chairs. Round and Square Felt Pads by Size hold 10 to 90 pads of one size, so the 40 mm pack of 40 covers ten chairs. The 101-piece pad pack mixes eight sizes, so count the pieces in your size in its size table.
When should felt chair pads be replaced?
When the felt is flattened, worn through or holding dirt you cannot brush out. Old stick-on pads peel off and new ones press on; nail-on glides pry off with a flat screwdriver.






