Patterned Chair Leg Socks
16 knitted socks of one design and color, for 4 chairs
$20.99 · Free US shipping until Dec 31
Knitted socks with a closed bottom that pull over the feet of chair and table legs, in a pineapple lattice or an arrow band design. One pack of 16 covers four four-legged chairs.
- 16 socks in one design and color, enough for four chairs
- Fits round or square legs 6 to 17 cm (2.4 to 6.7 in) around
- Pineapple: beige, brown or black. Arrow: beige, brown or dark brown
- Pulls on by hand: no glue, nails or tools
Not happy, or the wrong size? Email us within 30 days of delivery and we refund you. No need to send anything back.
- Secure checkout: pay with PayPal, Shop Pay or card
- Free tracked US shipping until Dec 31, 2026. Estimated delivery 6 to 14 business days after you order
- 30-day refund policy · Size guide
Patterned chair leg socks pull over the feet of chair and table legs so soft knit, not the bare leg, touches your floor. Each sock is a knitted tube closed at the bottom, in one of two designs: pineapple, an all-over diagonal lattice with a ruffled top edge, or arrow, a ribbed knit with a band of chevrons around the middle. A pack holds 16 socks, enough for four chairs.
Want a plainer look? Browse all our chair leg socks, or see the knitted chair socks, which have a felt pad in the bottom. Before you order, read how to measure chair legs for protectors.
Sizes and what is in the pack
The supplier rates every design for legs 6 to 17 cm (2.4 to 6.7 in) around. That works out to:
| Measure | Fits (mm) | Fits (in) |
|---|---|---|
| Around any leg | 60 to 170 | 2.4 to 6.7 |
| Round leg, across | 19 to 54 | 0.75 to 2.1 |
| Square leg, per side | 15 to 42 | 0.6 to 1.7 |
| Design | Colors | Per pack |
|---|---|---|
| Pineapple | Beige, brown, black | 16 socks |
| Arrow | Beige, brown, dark brown | 16 socks |
Each pack is one design in one color. The supplier does not list the length of the sock; on a leg it covers the lowest part, as in the photos.
How to choose and measure
Wrap a strip of paper or a soft tape measure around one leg where the top of the sock will sit, a few centimeters above the floor, and read the length. Anything from 6 to 17 cm (2.4 to 6.7 in) is inside the range. On a tapered leg, measure the widest part the sock has to cover.
Near the top of the range the knit is stretched tight; near the bottom it sits looser and can wrinkle a little.
Pick a color that suits the room: beige for light wood, brown for oak and walnut, black or dark brown for dark wood and black metal legs.
How to fit them
- Tip the chair back or lay it on its side on a soft surface.
- Stretch the open top of a sock with your fingers.
- Pull it over the end of the leg until the closed bottom sits flat under the foot.
- Straighten the sock so the pattern faces out. No glue, nails or tools are needed.
To take one off, roll the top down and slide it off. Nothing is left on the leg.
Where they work, and their limits
These socks suit wooden or metal chairs, stools and small tables on hardwood, laminate, vinyl and tile. Knit between the leg and the floor softens the scrape of a bare leg end, and the covered foot knocks more gently against baseboards and other chairs.
There is no felt pad or rubber in the bottom: knit fabric is what touches the floor. Grit picked up by the knit can scratch a soft floor, so sweep before fitting them and shake them out from time to time. If you want felt under the leg, choose felt chair booties or felt bottom chair leg covers.
The socks hold on by stretch alone. On dining chairs pulled in and out all day, a sock can twist or slip and need straightening. For those chairs, fitted chair leg caps stay in place better. Legs more than 54 mm (2.1 in) across are outside the range; see large furniture leg caps.
Fabric soaks up spills, so keep them off wet floors. They are not made for casters, hairpin legs or sled bases.
Questions
Which designs and colors are there?
Pineapple, an all-over diagonal lattice knit with a ruffled top edge, in beige, brown or black. Arrow, a ribbed knit with a band of chevrons around the middle, in beige, brown or dark brown. Each pack is 16 socks in one design and color.
What size legs do they fit?
The supplier rates them for legs 6 to 17 cm (2.4 to 6.7 in) around. That is about 19 to 54 mm (0.75 to 2.1 in) across a round leg, or 15 to 42 mm (0.6 to 1.7 in) per side on a square leg. See how to measure chair legs.
Do they fit square legs?
Yes. The knit stretches over square legs as well as round ones, as long as the leg is 6 to 17 cm (2.4 to 6.7 in) around.
Is there felt or rubber on the bottom?
No. The bottom is closed knit, so fabric touches the floor. For felt under the leg, see felt chair booties or knitted chair socks with a felt base.
Do they slide on hard floors?
Yes, knit slides on hardwood, laminate, vinyl and tile. Sweep before fitting them and shake them out now and then, because grit caught in the knit can scratch.
How many come in a pack?
16 socks, enough for four four-legged chairs.












